原理principle：

除塵器設備工作時，含塵氣體由進風口進入灰斗，由于氣體體積的急速膨脹，一部分較粗的塵粒受慣性或自然沉降等原因落入灰斗，其余大部分塵粒隨氣流上升進入袋室，經濾芯過濾后，塵粒被滯留在濾芯的外側，凈化后的氣體有濾芯內部進入上箱體，再由閥板孔、排風口排入大氣，從而達到除塵的目的。

When the dust collector equipment is working, the dust-containing gas enters the ash hopper from the air inlet. Due to the rapid expansion of the gas volume, a part of the coarser dust particles fall into the ash bucket due to inertia or natural settlement, and most of the other dust particles rise with the airflow. The bag chamber is filtered by the filter element, and the dust particles are retained on the outer side of the filter element. The purified gas has the inside of the filter element and enters the upper case body, and then is discharged into the atmosphere by the valve plate hole and the exhaust air port, thereby achieving the purpose of dust removal.

特點Features：
●本除塵器采用分室停風脈沖噴吹清灰技術，克服了常規脈沖除塵器和分室反吹除塵器的缺點，清灰能力強，除塵效率高，排放濃度低，漏風率小，能耗少，鋼耗少，占地面積少，運行穩定可靠。
●集成式過濾單元，方便拆卸和過濾元件的清洗和更換。
●既可以選擇濾袋，也可以選擇濾芯作為過濾元件。 
●本公司采用的PE燒結濾芯采用超高分子量聚乙烯燒結成型，結構緊湊、結實、質輕、能承受較高的過濾壓力、無毒無味，濾芯孔徑分布均勻，耐強酸、強堿、耐高溫、機械性能好。
●箱體采用氣密性設計，密封性好，檢查門用優良的密封材料，制作過程中以煤油檢漏，漏風率很低。
●進。出口風道布置緊湊，氣流阻力小。
●所有過濾器出廠前都已經裝配完成并經過各種測試。

●This dust collector adopts the split-air pulse pulse blowing cleaning technology to overcome the shortcomings of the conventional pulse dust collector and the compartment back-blowing dust collector. It has strong cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate and low energy consumption. The steel consumption is small, the floor space is small, and the operation is stable and reliable.
● Integrated filter unit for easy removal and cleaning and replacement of filter elements.
● You can choose either the filter bag or the filter element as the filter element.
●The PE sintered filter core used by our company is sintered by ultra-high molecular weight polyethylene. It is compact, strong, light in weight, can withstand high filtration pressure, non-toxic and tasteless, and has uniform pore size distribution. It is resistant to strong acid, alkali and high temperature. Good mechanical properties.
●The cabinet adopts airtight design, good sealing performance, excellent sealing material for inspection door, kerosene leak detection during production, and low air leakage rate.
● Enter. The outlet duct is compactly arranged and the airflow resistance is small.
●All filters have been assembled and tested in various ways before leaving the factory.